HDMI setup
The HDMI setup is required to use the component connected to
the HDMI terminal or to use the HDMI control functions.
MULTI CONTROL
HDMI setup flow
HDMI setup flow
The HDMI control functions can be set.
1
Enter the HDMI Setup mode.
[HDMI SETUP]
Use [MULTI CONTROL ∞/5] to select an item to set.
[HDMI SETUP]
Display
"AUDIO OUT"
"LIP SYNC" (KRF-V6400D only)
"LINK SET"
"POWER CONTROL"*
"EXIT"
1
*
This item can be set when "LINK SET" is set to "ON".
2
Set each item.
See the followings for each HDMI control item.
26
KRF-V6400D/KRF-V5450D
HDMI SETUP
HDMI SETUP
MULTI CONTROL
/
Setting
Sets the HDMI audio output destination.
Adjusts the deviation in time between
the output audio and video.
Sets whether or not the HDMI control
functions are used.
Interlocks power ON-OFF of components
1
by means of HDMI control.
Exits the HDMI Setup mode.
Audio Out
Audio Out
This function selects whether the output destination of the audio
input is the TV or this unit.
1
Select "AUDIO OUT".
[HDMI SETUP]
Use [MULTI CONTROL ∞/5].
[HDMI SETUP]
2
Set the HDMI audio output destination.
[MULTI CONTROL ∞/5]
[HDMI SETUP]
Display
Setting
"AMP"
Outputs the audio from the speakers connected to this unit.
"TV"
Outputs the audio from the TV connected to this unit.
3
Go to the next setting.
• If "TV" is selected and the audio is not output or is
interfered with by noise, set the audio output of the
player component to PCM.
• If "TV" is selected, adjust the volume on TV.