Connecting Components Equipped With Hdmi Terminals - Kenwood KRF-V6400D Instruction Manual

Connecting components equipped with HDMI terminals

The HDMI connection can transfer both the video and audio signals through a single HDMI cable. It makes possible entertainment of
high-quality video recorded on Blu-ray discs as well as high-quality audio including multi-channel PCM audio. The HDMI connection
also enables interlocking of the power of the TV with that of this unit and adjustment of the volume of this unit from the TV. (See <HDMI
setup> §.)
1
Using an HDMI cable, connect the HDMI input terminal ([HDMI 1] or [HDMI 2] terminal) of this unit to the HDMI
output terminal of a playback component such as a Blu-ray disc player.
2
Using another HDMI cable, connect the [HDMI MONITOR OUT] terminal of this unit to the HDMI input terminal
of the TV monitor.
HDMI MONITOR IN
TV Monitor
Using the HDMI function
The HDMI setup is required to use the HDMI function. See <HDMI
setup> §.
Flow of video signal
The digital video signal input from the HDMI input terminal is
output only at the HDMI monitor output terminal.
Flow of audio signal
The digital audio signal input from the HDMI input terminal
is output at the speakers connected to this unit. It can also be
output at the TV monitor connected to this unit according to the
HDMI setup. (See <HDMI setup> §.)
12
KRF-V6400D/KRF-V5450D
HDMI OUT
Digital Tuner and etc.
• An HDMI/DVI converter cable is necessary to connect a
TV monitor with a DVI input terminal. The TV monitor also
needs to be compatible with HDCP (High-bandwidth
Digital Contents Protection). Note that the video may be
unable to be monitored depending on the combined
components.
• Use an HDMI-certified category 2 cable (High Speed
HDMI™ Cable) for the connection.
• When components are connected through the
HDMI connection, it takes a certain period before the
video/audio are output because they need mutual
authentication.
• If the video and/or audio are not output normally, turn all
of the connected components off then on, and try again.
• If the resolution of the incoming video signal is different
from that of the TV, no video is output. In this case, adjust
the resolution on the connected component.
HDMI OUT
Blu-ray Disc Player