Speaker Settings; Speaker Setup (Easy Setup) - Kenwood KRF-V6200D Instruction Manual

Speaker settings

Speaker setup (Easy Setup)

The speaker settings can be completed by simply selecting the
room type and listening position. The audio will be corrected
automatically according to the characteristics of the speaker
system in use.
If more detailed speaker settings are required, use the procedure
in <Speaker setting flow> (.
EASY SETUP
MULTI
CONTROL
œ Press [EASY SETUP] to enter the easy setup mode.
∑ Use [MULTI CONTROL 5/∞] to select the speaker
configuration. (KRF-V7200D only)
Display Selection
"7_1" The speaker configuration consists of 7.1 channels.
"5_1" The speaker configuration consists of 5.1 channels.
• For KRF-V6200D, skip this step.
é Press [EASY SETUP].
® Use [MULTI CONTROL 5/∞] to select your room
type.
4m (13'1-7/8")
3m (9'10-3/8")
2
12m
SMALL MEDIUM
† Press [EASY SETUP].
18
English
/
5m (16'5-3/8")
2
24m 35m
LARGE
¥ Use [MULTI CONTROL 5/∞] to select your listening
position.
ü Press [EASY SETUP].
• The speakers are set up as shown below.
Subwoofer :
Front speaker:
Center speaker:
Surround speaker:
Surround back speaker
(KRF-V7200D: When "7_1" is selected in step ∑):
Subwoofer re-mix* :
* The function for adding the bass of other channels to the
subwoofer channel according to the speaker setup.
Note:
• Easy setup with may not be appropriate with certain speaker
systems or listening environment. In this case, go through
<Speaker setup ("SP SETUP")> ).
2
FRONT
CENTER
REAR
ON
Average size
Average size
Average size
ON
ON