Preparation For Playing Music Or Movie; Turning On The Power; Setting The Speaker System; Selecting The Input Mode - Kenwood KRF-V6400D Instruction Manual

Preparation for playing music or movie

LISTEN MODE
SPEAKERS
ON/OFF
LISTEN MODE

Turning on the power

Turning on the power
1
Turn the connected monitor and player component
ON.
2
Press [ RECEIVER] (remote control unit) or [ ]
(main unit) to turn on the unit.

Setting the speaker system

Setting the speaker system
Press [SPEAKERS ON/OFF] to select the speaker
system(s) to be used.
"SP" indicator lights up when turning on the speaker system.
28
KRF-V6400D/KRF-V5450D
INPUT SELECTOR
INPUT MODE
RECEIVER
Input source keys

Selecting the input mode

Selecting the input mode
When playing a component connected to the digital input
terminal (CD, VIDEO or DVD) or the HDMI input terminal (HDMI
1 or HDMI 2), set the input mode to match the type of the audio
input.
1
Use [INPUT SELECTOR] to select "HDMI 1", "HDMI
2", "DVD", "VIDEO" or "CD" input source.
2
Press [INPUT MODE] to select the input mode.
Each press switches the mode as follows.
When in HDMI 1 or HDMI 2 input source
Display Setting
The digital and analog inputs are switched automatically
according to the input signal. When a digital input is detected,
"AUTO"
the decode mode is also switched according to the signal type
(Multi-channel PCM/Dolby Digital/DTS).
The input mode is fixed at digital to accelerate the input signal
processing and eliminate lack of audio at the beginning of
"MANUAL" playback.
The decode mode is also fixed according to the type of the
signal to be played.
When in DVD, VIDEO or CD input source
Display Setting
The digital and analog inputs are switched automatically
according to the input signal. When a digital input is detected,
"AUTO"
the decode mode is also switched according to the signal type
(PCM/Dolby Digital/DTS).
The input mode is fixed at digital to accelerate the input signal
processing and eliminate lack of audio at the beginning of
"MANUAL" playback.
The decode mode is also fixed according to the type of the
signal to be played.
The input mode is fixed at analog.
"ANALOG"* 1
This is selected for playback of analog player components.
1
* This cannot be selected when in DTS play mode.
• The "AUTO DETECT" indicator lights when "AUTO" is
selected.
• If the audio is lost as a result of change in the input signal
while "MANUAL" is selected, press [LISTEN MODE].