How To Read This Manual - Kenwood KRF-V6400D Instruction Manual

How to read this manual

The operating instructions given in this manual assume that the user mainly operates the receiver using the remote control unit. When the
same operation is also available on the main unit, the operating method is indicated in illustrations.
The [VOLUME CONTROL], [MULTI CONTROL] and [INPUT SELECTOR] knobs on the main unit are operated by turning the knobs clockwise
or counterclockwise.
Speaker setup
(Detailed Setup)
The detailed settings allow you to enjoy full performance of the
receiver according to the environment of your listening room.
For creating the best listening environment, Kenwood
recommends to perform the setup at the listening position.
SETUP
MULTI CONTROL
/
Speaker setup flow peaker setup flow
Speaker settings consist of 6 elements.
1
Enter the Detailed Setup mode.
[SETUP]
Use [MULTI CONTROL ∞/5] to select an item to set.
e t t
[SETUP]
Elements Display Setting
Selects whether each speaker channel
Speaker Configuration "SP SETUP"
is used or, if used, its size.
Selects the output level from each
Speaker Level "TESTTONE"
speaker.
Selects the distance between each
Speaker Distance "DISTANCE"
speaker and the listening position.
Sets the lower limit of the bass
frequencies reproduced from the
speakers set to "NML" in the "SP
Crossover "CROSSOVER" SETUP". The frequencies below the
frequency set here are distributed to
other speakers (those set to "LRG"
and the subwoofer).
2
Set each item.
See the followings for each setup item.
• In this manual, KRF-V6400D is used for the illustrations of front panel and rear panel.
• The illustrations of the main unit display panel and the examples of operations are shown for the purpose of explanation and may
differ from the actual view or operation.
6
KRF-V6400D/KRF-V5450D
This icon indicates that the function can be operated (or
recommended to operate) only with the unit displayed with the icon.
: main unit
The knob on the main unit
is pointed with an arrow to
indicate that it can be turned
in either direction.
The keys and controls used in
the operations described in each
section are indicated with their
names.
The descriptions of the functions
available only on the remote
control unit are accompanied only
with the illustration of the remote
control unit. The descriptions of
the functions available only on the
main unit are accompanied only
with the illustration of the main
unit.
The names of the operated keys
or knobs are enclosed inside
brackets.
When a key is used to select
an option, the list of options is
shown in the form of a table.
This icon indicates supplementary
information, restrictions in
operation or tips on operation.
This icon indicates that the
Continued
description continues on the
next page.
: remote control unit
Playback
INPUT SELECTOR
1
Select a source.
Use the Input source keys on the remote control unit to
select a source.
Or use [INPUT SELECTOR] knob or [AV AUX] key on the
main unit.
Example: Display when HDMI 1 input source is selected
2
Start playback from the selected source.
3 3
Use [VOLUME %/fi] to adjust the volume.
U e t
4
Enjoy various surround effects.
You can enjoy a variety of listen modes. (See <Surround
play using the listen mode> ¤.)
The surround effects can be fine tuned according to the
selected input source. (See <Adjustments according to
the playing source> ·.)
• The AV AUX input cannot be selected with the [INPUT
SELECTOR] knob of this unit. This input should be
selected using the [AV AUX] on this unit or the [AV AUX]
key on the remote control unit.
VOLUME CONTROL
AV AUX
VOLUME /
Input source keys