Mechanical Specifications - Seagate ST11200N Product Manual

30
______________________________________________________________________________________
7.6

Mechanical specifications

The following nominal dimensions are exclusive of the decorative front panel accessory. Refer to Figure
7.6-1 for detailed mounting configuration dimensions.
[3]
C
[1]
[2]
H
K
N
[4]
Figure 7.6-1a. Mounting configuration dimensions ("N" annd "ND" model drives)
Product Manual - Hawk 1 Family SCSI-2 (Volume 1), Rev. D
Height: 1.62 in
Width: 4.00 in
Depth: 5.74 in
Weight: 1.9 pounds
G
F
A
B
J
M
41.1 mm
101.6 mm
145.8 mm
0.84 kilograms
[4]
L
D
E
Notes:
[1] Mounting holes three on each side, 6-32 UNC. Max
screw length into side of drive 0.15 in. (3.81 mm).
Screw tightening torque 8.0 in-lb max with minimum
thread engagement of .12 in (3.00 mm).
[2] Mounting holes four on bottom, 6-32 UNC. Max
screw length into bottom of drive 0.20 in. (5.08 mm).
Screw tightening torque 8.0 in-lb max with minimum
thread engagement of .12 in (3.00 mm).
[3] Power and interface connections can extend past the
"A" dimension by 0.040 in (1.02 mm).
[4] Decorative front panel.
Inches
0.010
A 5.74 ±
B 4.00 ± 0.010
C 1.620 + 0.026
– 0.021
D 2.362 ± 0.010
E .620 ± 0.010
F 4.000 ± 0.010
0.018
G .250 ±
H 1.750 ± 0.010
J 3.750 ± 0.010
K 2.370 ± 0.010
P
L 1.725 ± 0.010
M 4.100 ± 0.010
N 0.19 ± 0.010
P 0.015 max
Millimeters
± .25
145.80
101.60 ± .25
41.15 + .66
– .53
60.00 ± .25
± .25
15.75
101.60 ± .25
± .46
6.35
44.45 ± .25
95.25 ± .25
60.20 ± .25
43.82 ± .25
.25
104.14 ±
4.83 ± .25
max
0.381