Table of Contents
Advertisement
3.4
Drive mounting
Users can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes.
See
Figure 3
and
Figure 4
for drive mounting dimensions. Follow these important mounting precautions when mounting the drive:
• Allow a minimum clearance of 0.030 in (0.76mm) around the entire perimeter of the drive for cooling.
• Use only 6-32 UNC mounting screws.
• The screws should be inserted no more than 0.140 in (3.56mm) into the bottom or side mounting holes.
• Do not overtighten the mounting screws (maximum torque: 6 in-lb).
3.4.1
Mechanical specifications
Refer to
Figure 3
and
Figure 4
Weight:
8TB and 6TB models
These dimensions conform to the Small Form Factor Standard documented in
Note
SFF-8301 and SFF-8323, found at
6X 6-32 UNC-2B
.14 THREAD DEPTH
0.169 ± 0.16 x 90
MAX TORQUE: 6 IN-LBS
2X 3.000±.010
2X 1.750±.010
2X 1.432±.020
2X 1.625±.020
3X.125±.010
2.000
Figure 3.
Mounting configuration dimensions 8TB and 6TB models (Option 1)
Note
The image is for mechanical dimension reference only and may not represent the actual drive.
Seagate SkyHawk AI Serial ATA Product Manual, Rev. D
for detailed mounting configuration dimensions. See
1.579 lb
716g
www.sffcommittee.org
C L OF DRIVE
C L OF CONN
.814±.020
3X 3.750±.010
C L OF DRIVE
.138±.015
Section
4.000±.010
1.638±.010
1.122±.020
3X .250±.010
BOTH SIDES
6X 6-32 UNC-2B
.14 THREAD DEPTH
0.160 ± 0.10 x 90
MAX TORQUE: 6 IN-LBS
1.028 MAX
[26.10MM]
3.4, "Drive mounting."
4.000±.001
BREATHER HOLE
DO NOT COVER
5.787 MAX
[147.00 MM]
22
Advertisement
Table of Contents
