Air Cleanliness; Electromagnetic Compatibility; Electromagnetic Susceptibility - Seagate ST11200N Product Manual

Product Manual - Hawk 1 Family SCSI-2 (Volume 1), Rev. D
_____________________________________________________________________________________
7.4.4.2 Vibration
a. Operating
The drive, as installed for normal operation, shall operate error free while subjected to continuous
vibration not exceeding
5-22 Hz @ 0.040 inches (1.03 mm) displacement peak-to-peak
22-400 Hz @ 1.0 g
Vibration may be applied in the X, Y, or Z axis.
b. Nonoperating
The limits of nonoperating vibration shall apply to all conditions of handling and transportation. This
includes both isolated drives and integrated drives.
The drive shall not incur physical damage or degraded performance as a result of continuous vibration
not exceeding
5-22 Hz @ 0.081 inches (2.05 mm) displacement peak-to-peak
22-400 Hz @ 2.00 g's
Vibration may be applied in the X, Y, or Z axis.
7.4.5

Air cleanliness

The drive is designed to operate in a typical office environment with minimal environmental control.
7.5

Electromagnetic compatibility

7.5.1

Electromagnetic susceptibility

As a component assembly, the drive is not required to meet any susceptibility performance requirements. It
is the responsibility of the system integrator to perform those tests required to ensure that equipment oper-
ating in the same system as the drive does not adversely affect the performance of the drive. See section
6.1.2, and see Table 7.2-1, DC Power Requirements.
29