Table of Contents
Advertisement
www.seagate.com
3.4
Drive mounting
Users can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-
mounting holes. See Figure 4 for drive mounting dimensions. Follow these important mounting precautions when mounting
the drive:
•Allow a minimum clearance of 0.030 in (0.76mm) around the entire perimeter of the drive for cooling.
•Use only 6-32 UNC mounting screws.
•The screws should be inserted no more than 0.140 in (3.56mm) into the bottom or side mounting holes.
•Do not overtighten the mounting screws (maximum torque: 6 in-lb).
3.4.1
Mechanical specifications
Refer to Figure 4 for detailed mounting configuration dimensions. See Section 3.4, "Drive mounting."
Weight:
NOTE
4X 6-32 UNC 2B
3 MIN THREAD DEPTH
.14 MAX FASTENER PENETRATION
MOUNTING HOLE.
MAX TORQUE 6 IN/LBS
2X 3.000±.010
2X 1.625±.020
Mounting configuration dimensions
Figure 4.
NOTE
Seagate Exos X24 SATA Product Manual, Rev. A (Draft 1)
24/20TB -1.51lb
685 g
These dimensions conform to the Small Form Factor Standard documented in SFF-
8301 and SFF-8323, found at www.snia.org/technology-communities/sff/specifications
1.432
.125±.010
3.750±.010
4.000±.010
Z
2.000
The image is for mechanical dimension reference only and may not represent the
actual drive.
16TB - 1.477lb
670g
B
Y
.814
C L OF CONN
2.000
C L OF DRIVE
.140±.015
1.028 MAX
C L OF DRIVE
Configuring and mounting the drive
12/10TB - 1.44lb
655g
4.000±.010
1.123±.020
.250±.010
2X 6-32 UNC 2B
Z
3 MIN THREAD DEPTH
.14 MAX FASTENER PENETRATION
MOUNTING HOLES BOTH SIDES.
MAX TORQUE 6 IN/LBS
[26.11MM]
5.787 MAX
[146.99MM]
Y
28
Advertisement
Table of Contents
