Relative Humidity; Effective Altitude (Sea Level Ref); Shock And Vibration - Seagate ST11200N Product Manual

Hawk 1 family
Hide thumbs Also See for ST11200N:
Table of Contents

Advertisement

Product Manual - Hawk 1 Family SCSI-2 (Volume 1), Rev. D
_____________________________________________________________________________________
7.4.2

Relative humidity

The values below assume that no condensation on the drive occurs.
a.
Operating
8% to 80% relative humidity with a maximum gradient of 10% per hour.
b.
Non-Operating
5% to 95% relative humidity.
7.4.3
Effective altitude (Sea level reference)
a.
Operating
-1000 to +10,000 feet (-305 to +3048 metres)
b.
Non-Operating
-1000 to +40,000 feet (-305 to +12,210 metres)
7.4.4

Shock and vibration

Shock and vibration limits specified in this document are measured directly on the drive chassis. If the drive
is installed in an enclosure to which the stated shock and/or vibration criteria is applied, resonance's may
occur internally to the enclosure resulting in drive movement in excess of the stated limits. If this situation is
apparent, it may be necessary to modify the enclosure to minimize drive movement.
The limits of shock and vibration defined within this document are specified with the drive mounted by any
of the four methods shown in Figure 7.4.4-1. Orientation of the side nearest the LED may be up or down,
though the figure shows it down.
7.4.4.1
Shock
a. Operating
The drive, as installed for normal operation, shall operate error free while subjected to intermittent
shock not exceeding 10 g's at a maximum duration of 11 ms (half sinewave). Shock may be applied in
the X, Y, or Z axis.
b. Nonoperating
The limits of nonoperating shock shall apply to all conditions of handling and transportation. This in-
cludes both isolated drives and integrated drives.
The drive subjected to nonrepetitive shock not exceeding 60 g's at a maximum duration of 11 ms (half
sinewave) shall not exhibit device damage or performance degradation. Shock may be applied in the X,
Y, or Z axis.
c. Packaged
The drive packaged in a single or multiple drive pack of gross weight 20 pounds (8.95 kg) or less by
Seagate for general freight shipment shall withstand drop test from heights listed below against a con-
crete floor or equivalent. For additional details refer to specifications 30190-001 (under 100 lbs) or
30191-001 (over 100 lbs).
Package Size
3
600 - 1800 in
(9,832 - 29,502 cm
3
3
>1800 in
(>29,502 cm
Drop Height
3
)
48 in (121 cm)
)
42 in (106 cm)
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents