Combination Meter - Yamaha YZF-R6 99 Service Manual

Coolant
temperature
0_C 40_C
41_C 117_C
118_C
140_C
141 _C

COMBINATION METER

Speedometer
1
Clock, odometer
2
"SELECT" button
3
"RESET" button
4
INSTRUMENT FUNCTIONS
Display
Symbol is on and
"LO" is displayed.
Symbol is on and
temperature is dis-
played.
Symbol and tem-
perature flashes
and indicator light
comes on.
Symbol flashes,
"HI" is displayed
and flashes, and
the indicator light
comes on.
8-3
Conditions
Go ahead with riding.
Go ahead with riding.
Stop the motorcycle and
allow it to idle until the
coolant temperature goes
down.
If the temperature does
not go down, stop the en-
gine. Refer to "OVER-
HEATING" in chapter 9.
Stop the engine and allow
it to cool.
Refer to "OVERHEATING"
in chapter 9.
This combination meter is equipped with the fol-
lowing.
S A speedometer
S An odometer
S Two trip odometers
S A fuel reserve tripmeter
S A clock
For GB and USA models only:
To change the speedometer display from kilo-
meters to miles, press the "SELECT" button for
at least two seconds.
Odometer and trip meters
Use the trip meters to estimate how far you can
ride on a tank of fuel.
Use the fuel reserve trip meter to see the dis-
tance traveled from when the fuel level dropped
to the reserve level.
Push the "SELECT" button to change between
the odometer mode "ODO" and the trip odome-
ter modes "TRIP 1"and "TRIP 2" in the following
order:
"ODO" ! "TRIP 1" ! "TRIP 2" ! "ODO"
ELEC
What to do