Installing The Rear Brake Master Cylinder - Yamaha YZF-R6 99 Service Manual

FRONT AND REAR BRAKES
CAUTION:
Brake fluid may damage painted surfaces
and plastic parts. Therefore, always clean
up any spilt brake fluid immediately.
4. Bleed:
S brake system
Refer to "BLEEDING THE HYDRAULIC
BRAKE SYSTEM" in chapter 3.
5. Check:
S brake fluid level
Below the minimum level mark a ! Add the
recommended brake fluid to the proper level.
Refer to "CHECKING THE BRAKE FLUID
LEVEL" in chapter 3.
6. Check:
S brake lever operation
Soft or spongy feeling ! Bleed the brake
system.
Refer to "BLEEDING THE HYDRAULIC
BRAKE SYSTEM" in chapter 3.
EAS00608
INSTALLING THE REAR BRAKE MASTER
CYLINDER
1. Install:
S copper washers
S brake hoses
S union bolt
S button head bolts
WARNING
Proper brake hose routing is essential to in-
sure safe motorcycle operation. Refer to
"CABLE ROUTING".
CAUTION:
When installing the brake hose onto the
brake master cylinder, make sure that the
brake pipe touches the projection a as
shown.
7-29
CHAS
New
30 Nm (3.0 mSkg)