Assembling The Crankcase - Yamaha YZF-R6 99 Service Manual

CRANKCASE
EAS00415

ASSEMBLING THE CRANKCASE

1. Lubricate:
S crankshaft journal bearings
(with the recommended lubricant)
Recommended lubricant
Engine oil
2. Apply:
S sealant
(onto the crankcase mating surfaces and the
groove a of the oil baffle plate)
Yamaha bond No. 1215
90890-85505
NOTE:
Do not allow any sealant to come into contact
with the oil gallery or crankshaft journal bear-
ings. Do not apply sealant to within 2
the crankshaft journal bearings.
3. Install:
S dowel pin
4. Set the shift drum assembly and transmis-
sion gears in the neutral position.
5. Install:
S lower crankcase 1
(onto the upper crankcase 2 )
CAUTION:
Before tightening the crankcase bolts, make
sure that the transmission gears shift cor-
rectly when the shift drum assembly is
turned by hand.
4-64
ENG
3 mm of