1 Fuel pump lead
2 Pickup coil lead
3 Clutch cable
4 Rear brake switch lead
A Route the ignition coil lead over the heat protector
plate.
B Position the face of steel clip up ward.
C Route the clutch cable through the guide on the
frame.
D Route the coolant hose under the heat protector
plate.
CABLE ROUTING
E Route the clutch cable through the guide on the ra-
diator.
F Fasten the clutch cable to the coolant hose protec-
tor with a plastic band.
G Fasten the rear brake switch lead to the footrest
bracket with a plastic locking tie and cut the end of
locking tie.
H Fasten the fuel pump lead and rear brake switch
lead with a plastic band on the fuel pump bracket.
2-35
SPEC