Cable Routing - Yamaha YZF-R6 99 Service Manual

EB206000

CABLE ROUTING

1 Throttle cables
2 Front brake hose
3 Clutch cable
4 Starter cable
5 Left handlebar switch lead
6 Main switch lead
7 Right handlebar switch lead
CABLE ROUTING
A Install the headlight relays onto the headlight housing bridge.
B Route the headlight lead through the plastic guide.
C Route the right handlebar switch lead in front of the front fork inner
tube.
D Route the throttle cables between the brake hose and right handlebar
switch lead.
E Route the wire harness through under the left handlebar switch lead
and starter cable.
F Fasten the left handlebar switch lead to the front fork with a plastic
locking tie and cut the end of locking tie.
2-33
SPEC