Installing The Rear Wheel; Adjusting The Rear Wheel Static Balance - Yamaha YZF-R6 99 Service Manual

REAR WHEEL, BRAKE DISC, AND REAR WHEEL
SPROCKET
EAS00571

INSTALLING THE REAR WHEEL

1. Lubricate:
S wheel axle
S wheel bearings
S oil seal lips
Recommended lubricant
Lithium soap base grease
2. Install:
S rear wheel
S brake caliper bracket
S adjusting blocks
S wheel axle
S washer
S wheel axle nut
S brake caliper
3. Adjust:
S drive chain slack a
Drive chain slack
40
Refer to "ADJUSTING THE DRIVE CHAIN
SLACK" in chapter 3.
4. Tighten:
S wheel axle nut
S brake caliper bolts
WARNING
Make sure that the brake hose is routed
properly.
EAS00575
ADJUSTING THE REAR WHEEL STATIC
BALANCE
NOTE:
S After replacing the tire, wheel or both, the rear
wheel static balance should be adjusted.
S Adjust the rear wheel static balance with the
brake disc and rear wheel drive hub installed.
1. Adjust:
S rear wheel static balance
Refer to "FRONT WHEEL".
7-13
CHAS
50 mm
150 Nm (15.0 mSkg)
27 Nm (2.7 mSkg)