SWINGARM AND DRIVE CHAIN
NOTE:
Before removing the drive sprocket, drive chain,
and rear wheel, measure the drive chain slack
and the length of a tenlink section of the drive
chain.
EC573000
REMOVING THE SWINGARM
1. Remove:
S Bolt (connecting rod) 1
S Connecting rod 2
NOTE:
Remove the bolt while holding the swingarm.
2. Loosen:
S Pivot shaft adjust bolt 1
NOTE:
Loosen the pivot shaft adjust bolt using a pivot
shaft wrench 2
3. Remove:
S Pivot shaft 1
S Swingarm
EAS00704
REMOVING THE DRIVE CHAIN
1. Remove:
S drive chain
NOTE:
Only cut the drive chain if or the swingarm is to
be replaced.
7-70
CHAS
Pivot shaft wrench:
90890-01471