Sleep Operation; Setting The Sleep Timer - Sharp HT-CN550DVW3 Operation Manual

Sleep operation

ON STAND-BY
ON STAND-BY
PRESET
SLOW
TUNING
FUNCTION
MENU
PBC
1
4
7
EQUALIZER
MIC
ECHO
AUDIO SUBTITLE
SLEEP
SLEEP DIRECT
OPEN CLOSE
MUTE PRESET
PLAY PAUSE OSD
STOP TUNING
SETUP
ENTER
TITLE
RETURN
2 3
5 6
8 9
PROG
0
LISTENING
VOLUME
MODE
ZOOM ANGLE
REPEAT A-B

Setting the sleep timer

You can set the unit to the power stand-by mode at the specified time.
1
Playback the desired sound source.
2
Press the SLEEP button.
TV screen
Sleep 120 mins
To change the sleep time:
Press the SLEEP button repeatedly to select the desired sleep time. The time will
decrease as follows.
90 MINS 60 MINS
120 MINS
3
Your system will enter the power stand-by mode automatically
after the preset time has elapsed.
To cancel the sleep operation:
To cancel the sleep operation, press the SLEEP button until "OFF" appears on the
display.
To confirm the remaining sleep time:
Press the SLEEP button whilst the sleep timer is set.
The remaining sleep time is displayed for about 5 seconds.
Caution:
This unit cannot set the sleep timer of other equipment.
To use the sleep timer using other equipment, you should also set the timer on
the equipment separately.
HT-CN550DVW3
ENGLISH
Unit display
SLEEP
30 MINS
OFF
E-48