Audio Connection To Other Equipment - Sharp HT-CN550DVW3 Operation Manual

To listen to TV or VCR sound via the speakers of this unit:
Press the FUNCTION button repeatedly to select the desired audio
input.
ON STAND-BY OPEN CLOSE "AUX 1" or "AUX 2".
PRESET MUTE PRESET
SLOW PLAY PAUSE OSD
TUNING STOP TUNING
FUNCTION
FUNCTION SETUP
ENTER

Audio connection to other equipment

Audio signal
Audio cable
Notes:
Change the TV input in accordance with the connected socket.
Do not connect other equipment (VCR, etc.) between the TV and this unit.
Pictures may be distorted.
Refer to the operation manual of the equipment to be connected.
Insert the plugs fully to avoid fuzzy pictures or noise.
Unit display
ESET CHP PROG SLEEP REPEAT 1 A - B
KHz
MHz
After checking all the connections have been made correctly, plug the AC power lead
of this unit into the wall socket.
Notes:
To audio
MD recorder
input socket
AC Plug Adaptor
In areas (or countries) where a wall socket as shown in illustration
the unit using the AC plug adaptor supplied with the unit, as illustrated. The AC plug
adaptor is not included in areas where the wall socket and AC power plug can be
directly connected (see illustration
Note:
An AC plug adaptor is not supplied if the lead has an Australian Standard plug.
Wall socket
(AC 220 ~ 240 V, 50/60 Hz)
Connecting the AC power lead
Plug the AC power lead into the wall socket, after any connections.
Unplug the AC power lead from the wall socket if the unit will not be in use for a
prolonged period of time.
Use only the supplied AC power lead. Using other power leads may cause an
electric shock or fire.
).
1
HT-CN550DVW3
ENGLISH
1
2
is used, connect
2
E-16