Sharp HT-CN550DVW3 Operation Manual page 47

Adjusting channel delay/speaker level (continued)
HT-CN550DVW3
ENGLISH
Test tone
You can check the sound output from the speakers.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button to select DVD mode.
3
Press the SETUP button.
4
Press the ENTER button.
5
Press the button to select "SPEAKER SETUP" and then press
the ENTER button.
6
Press the button and use the
TONE ON".
7
Press the ENTER button.
Speakers emit the test tone for 2 seconds in turn, starting with the front speaker
(left).
Front speaker (left)
Surround speaker (left)
8
To end the test tone, press the SETUP button.
Notes:
When the listening mode is "STEREO", only the front speakers can be checked.
If there is a disc in the tray, you cannot check the sound output.
E-47
or button to select "TEST
Front speaker (right)
Centre speaker
Surround speaker (right)
Speaker level setting
If sounds from the speakers are uneven, you can equalise them by adjusting the
speaker levels.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button to select DVD mode.
3
Press the MODE button repeatedly to select the desired speaker.
4
Within 3 seconds, press the VOLUME + (VOLUME
(VOLUME ) button to adjust the level.
You can adjust the level at 1 dB intervals.
To adjust the levels of other speakers, repeat the operation from step 3.
Speaker type
FRONT LEFT Front speaker (Left)
CENTRE Centre speaker
FRONT RIGHT Front speaker (Right)
SURROUND LEFT Surround speaker (Left)
SURROUND RIGHT Surround speaker (Right)
SUBWOOFER Subwoofer
Notes:
The speaker type appears followed by "TREBLE", "BASS" and "MASTER VOLUME".
For details on "TREBLE" and "BASS", see page 25.
The volume can still be adjusted even after "MASTER VOLUME" disappears.
When the listening mode is "STEREO", you can change the level of the front
speakers and the subwoofer.
If subwoofer sound is distorted, lower the subwoofer level.
) or VOLUME –
Level range Default
setting
- 10 DB to + 10 DB 0 DB
- 10 DB to + 10 DB 0 DB
- 10 DB to + 10 DB 0 DB
- 10 DB to + 10 DB 0 DB
- 10 DB to + 10 DB 0 DB
- 10 DB to + 10 DB 0 DB