Adjusting Channel Delay/Speaker Level - Sharp HT-CN550DVW3 Operation Manual

Adjusting channel delay/speaker level

When speakers cannot be placed at equal distances, change speaker settings to
enjoy surround effects as if they were equally placed.
Example:
If the centre speaker is closer to the listening position than others by about 90 cm, set
as follows.
Sound from the centre speaker needs to be delayed for 90 cm. The delay time of 1
ms corresponds to 30 cm. Sound is heard as if all the speakers were equally placed.
Centre
speaker
Front
speaker (left)
Subwoofer
Surround
speaker (left)
1 The centre speaker is closer to the listener than others. In "Speaker level setting",
adjust the centre speaker level (see page 47).
2 In "Test tone", check the sound from each speaker (see page 47).
ON STAND-BY
ON STAND-BY OPEN CLOSE
PRESET MUTE PRESET
SLOW PLAY PAUSE OSD
TUNING STOP TUNING
FUNCTION
FUNCTION SETUP
ENTER
MENU TITLE
PBC RETURN
1 2 3
4 5 6
7 8 9
EQUALIZER PROG
0
MIC LISTENING
VOLUME
ECHO MODE
Front
speaker (right)
110 cm
200 cm
090 cm
Surround
speaker (right)
SETUP
ENTER
MODE
Channel delay setting
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button to select DVD mode.
3
Press the SETUP button.
4
Press the or button to select "AUDIO SETUP PAGE" and then
press the ENTER button.
5
Press the or button to select
"CHANNEL DELAY" and then
press the ENTER button.
6
Press the or button to select the desired speaker type.
7
Press or button to select the desired distance.
8
To complete the channel delay setting, press the SETUP button.
HT-CN550DVW3
ENGLISH
Audio Setup Page
SPDIF Setup
Dolby Digital Setup
Channel Delay
10 cm
Center
E-46