Timer And Sleep Operation (Remote Control Only) - Sharp HT-DV40U Operation Manual

Timer and sleep operation (Remote Control only)

Timer playback:
The unit turns on and plays the desired source (DVD/CD, USB,
TUNER, OPTICAL 1, OPTICAL 2, AUX IN) at a preset time.
This unit has 2 types of timer: ONCE TIMER and DAILY TIMER.
Once timer: Once timer play works for one time only at a preset
time.
Daily timer: Daily timer play works at the same preset time
every day.
For example, set the timer as a wake-up call every morning.
Using the once timer and daily timer in combination:
For example, use the once timer to listen to a radio programme, and
use the daily timer to wake up.
1 Set the daily timer (pages 54 - 56).
2 Set the once timer (pages 54 - 56).
1 minute or more
Daily timer
Start Stop
Note:
When set times for the daily timer and once timer overlap, the once
timer takes priority. Allow an interval of at least 1 minute between
operations.
Before setting timer:
Once timer
Start Stop
1
4
7
0
Timer playback
1 Check that the clock is set to the correct time (refer to page 31).
If it is not set, you cannot use the timer function.
2 For timer playback: Load discs to be played.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the
"ONCE" or "DAILY", and press the MEMORY/DIMMER
button.
Set the clock to the correct time if "ONCE" or "DAILY" does not
appear.
2 3
5 6
8 9
+10
or button to select
Continued to the next page
HT-DV40U
HT-DV50U
ENGLISH
E-54