Playing Karaoke - Sharp HT-CN550DVW3 Operation Manual

Playing karaoke

HT-CN550DVW3
ENGLISH
ON STAND-BY
FUNCTION
MIC
ECHO
Playing karaoke
You can enjoy karaoke to DVDs, video CDs, audio CDs and MP3 Discs by connecting
separately available microphone to this unit.
1
Set the MIC VOLUME control to "MIC 0" by pressing MIC button
and then press VOLUME – button to protect the speakers from
shock noise and to avoid disturbing noises.
2
Connect the microphone to the MIC 1 or MIC 2 socket or both
sockets for enjoying duets.
Use a microphone with a 6.3 mm (1/4") plug, an impedance of 600 ohms.
Use a standard plug adaptor when using a microphone with a 3.8 mm (1/8")
diameter plug.
3
Press the ON/STAND-BY button to turn the power on.
4
Load a karaoke disc and play it.
E-49
ON STAND-BY OPEN CLOSE
PRESET MUTE PRESET
SLOW PLAY PAUSE OSD
TUNING STOP TUNING
FUNCTION SETUP
ENTER
MENU TITLE
PBC RETURN
1 2 3
4 5 6
7 8 9
EQUALIZER PROG
0
MIC LISTENING
VOLUME
ECHO MODE
VOLUME
AUDIO SUBTITLE ZOOM ANGLE
SLEEP DIRECT REPEAT A-B
5
Adjust the volume of the audio source using the VOLUME +
(VOLUME ) or VOLUME – (VOLUME
6
Adjust microphone volume by pressing MIC button and then press
VOLUME + or VOLUME – button.
To obtain the desired musical pitch
(key control)
Press the Key Control button to obtain the desired musical pitch.
Press the button to lower the key.
Press the # button to raise the key.
Press the button to return to the normal key.
Notes:
The sound is produced in 2-channel stereo automatically whilst playing karaoke.
Sound of the playback source can be switched (see page 35).
The karaoke mode is disabled in the tuner function (FM) or during AUX functions.
When you sing too loud through the microphone, your voice may be distorted
depending on the devices connected. If this happens, lower the microphone volume.
If an extremely sensitive microphone is used, howling may be generated.
Unidirectional microphone is more appropriate for vocal use.
When you connect or disconnect a microphone, the sound is muted for a few seconds.
If squealing occurs:
Reduce the microphone volume.
Change the direction of the microphone.
Reduce the volume of the main unit.
Move the microphone away from the speakers.
Caution:
When not using the microphone, remove it from the MIC socket.
When connecting or disconnecting the microphone, set the MIC VOLUME control
to MIN.
ECHO
- Press ECHO to turn "ECHO" on. To toggle the echo level using the VOLUME +
or VOLUME − button.
ECHO ECHO 1 ECHO 2 ECHO 3
) button.
Key 01... 16
Key + 01... + 16
Key + 00
ECHO 4 ECHO 5 ECHO 6 ..... ECHO 10