Sharp HT-CN400DVE Quick Start Manual

MODEL
HT-CN400DVE
HT-CN500DVE
HOME CINEMA WITH DVD
Supplied aerial connection
Setting VIDEO OUTPUT
When connecting to the SCART OUT socket or S-VIDEO socket, switch the VIDEO OUTPUT
setting accordingly. See page 23 in the operation manual.
Caution:
FM aerial AM loop aerial
Do not connect a TV or VCR to SCART OUT, S-VIDEO OUT and VIDEO OUT at the same
time. The unit supports only a single connection.
Video cable
(commercially
available)
Audio cable
(commercially available)
Audio cable
(commercially available)
Audio cable
(commercially available)
92LCN500U0600
03F R AO 1
This Quick Start Guide will help you to correctly install
and operate your system.
If you require any advice or assistance regarding
your Sharp product, please visit our web-site
www.sharp.co.uk/customersupport.
Customers without Internet access may telephone
08705 274277 during office hours (or (01) 676 0648
if telephoning from Ireland).
Connections to TV
TV
To video
input socket
To SCART
To S-video input socket
input socket
S-video cable
(commercially available)
SCART cable
(supplied)
Video/Audio signal
Audio connections to TV, VCR, etc.
MD recorder
To audio
input socket
Audio signal
To audio
output sockets
Audio signal
VCR
TV
Audio signal
To audio
output sockets
Connecting the supplied speakers
Make sure to leave the AC power lead disconnected when connecting the speakers.
To prevent accidental short circuits between
0101
Connect the wires to
the speakers.
Black
Black Red
Caution:
Do not short-circuit the speaker wires.
If the power is turned on, malfunction may occur.
Front speaker
(right)
Black Red
Black
Black White Black
Front speaker Surround speaker
(left)
Connecting speaker wires
and terminals, connect the speaker wires to the speakers first and then to the unit.
Connect the other end
to the main unit.
Red
Red
Red
Black
Black
Incorrect
Centre speaker
Surround speaker
(left)
Green Black Blue
Black
Purple
Grey
Do it last!
After checking all the connec-
tions have been made
Subwoofer
(right)
plug the AC power lead of this
unit into the wall socket.
Wall socket
(AC 230 V, 50 Hz)
correctly,