Changing The Setup Menu - Sharp HT-CN550DVW3 Operation Manual

Changing the setup menu

HT-CN550DVW3
ENGLISH
Turn on the TV, and switch the input to the "VIDEO 1", "VIDEO 2", etc.
accordingly.
ON STAND-BY
FUNCTION
1
Press the ON/STAND-BY button to turn the
power on.
The startup screen appears.
The startup screen does not appear when the
input is not set to the disc mode. Press the
FUNCTION button to select DVD mode.
E-19
ON STAND-BY OPEN CLOSE
PRESET MUTE PRESET
SLOW PLAY PAUSE OSD
TUNING STOP TUNING
SETUP
FUNCTION SETUP
ENTER
MENU TITLE
PBC RETURN
ENTER
1 2 3
4 5 6
7 8 9
EQUALIZER PROG
0
MIC LISTENING
VOLUME
ECHO MODE
AUDIO SUBTITLE ZOOM ANGLE
SLEEP DIRECT REPEAT A-B
2
Press the SETUP button.
3
Press the or button to select a menu and press the ENTER but-
ton.
See the list on pages 20 - 24 for setup menu.
4
Press the , , or button to change the setting and press the
ENTER button.
See the list on pages 20 - 24 for the selectable parameters.
5
Press the SETUP button.
The setting is completed.
To change other settings, begin from step 2.
Notes:
During playback, "PREFERENCES" settings cannot be changed.
Settings are stored even if the unit is set to the stand-by mode.
The backup function protects the stored settings for a few hours should there be a
power failure or the AC power lead disconnection.
If the startup screen is blurred, change the TV type in the setup menu.