Changing The Setup Menu - Sharp HT-CN410DVH Operation Manual

Changing the setup menu

Turn on the TV, and switch the input to the "VIDEO 1", "VIDEO 2", etc. accord-
ingly.
1
Press the ON/STAND-BY button to turn the
power on.
The startup screen appears.
The startup screen does not appear when the
input is not set to the disc mode. Press the
FUNCTION button to select DVD mode.
If the startup screen is blurred, press the NTSC/
PAL button repeatedly to change the TV type.
2
Press the SETUP button.
3
Press the or button to select a menu
8 9
and press the ENTER button.
See the list on pages 20 - 23 for setup menu.
4
Press the , , or button to change the
8 9 ; :
setting and press the ENTER button.
See the list on pages 20 - 23 for the selectable
parameters.
Select "MAIN PAGE" and press the ENTER button.
The main page returns.
5
Press the SETUP button.
The setting is completed.
To change other settings, begin from step 2.
Notes:
During playback, "PREFERENCES" settings cannot be changed.
Settings are stored even if the unit is set to the stand-by mode.
The backup function protects the stored settings for a few hours should there be a
power failure or the AC power lead disconnection.
03/10/29 HTCN410DVH 8_E2.fm
HT-CN410DVH
ENGLISH
-- GENERAL PAGE --
TV DISPLAY
TV TYPE
VIDEO OUTPUT
ANGLE MARK
OSD LANGUAGE ENGLISH
SCREEN SAVER FRENCH
SPANISH
GERMAN
MAIN PAGE
ITALIAN
SET OSD LANGUAGE
E-19
E
F
S
V
I
N
P
E