A.c. Line Power - Classe Audio CP-50 Owner's Manual

A.C. LINE POWER

The preamplifier has no power switch. Its low power consumption and improved sonics
from always being ON led to the omission of an ON/OFF switch. In fact, while thoroughly musical
shortly after turn-on, the preamplifier will exhibit "sonic growth" for the first 300 hours of used.
For optimum sonic performance, you should consider use of the optional CLASSE
REFERENCE A.C. LINECORD. Consult your dealer regarding this accessory.
SAFETY FEATURE: The preamplifier is designed with an Auto-Muting Circuit which
engages and is indicated by two FLASHING RED ARROWS when the unit is first connected, or
after an A.C. power failure. After 45 seconds of stabilizing the preamplifier is automatically
switched to "MUTE" mode, after which all operating functions such as input etc. may then be
selected.
CAUTION: "FLOATING THE GROUND" OR DEFEATING THE GROUND ON A 3-
PRONG LINECORD MAY CREATE A SHOCK HAZARD. CONNECT ALL INTERCONNECT
CABLES BETWEEN THE ELECTRONICS BEFORE CONNECTING THE A.C. LINECORDS
TO THE WALL OUTLETS. THIS WILL REDUCE THE POTENTIAL SHOCK HAZARD. SEE
ALSO THE WARRANTY SECTION OF THIS OWNER'S MANUAL.
-5-