Table of Contents
Advertisement
Clock
Setting procedure
Changing from summer to
winter time, or similar
When the appliance is connected for the first time or
after a power cut, the j symbol and three zeros flash
in the display. Set the clock.
The function selector must be switched off.
Example: 13:00
1. Press the 0 button.
12:00 appears in the display and the 0 symbol
flashes.
2. Use the + or - button to change the clock.
After a few seconds, the time is saved.
The 0 symbol goes out.
Press the j Clock button twice and change using
the + or - buttons.
31
Advertisement
Table of Contents
