Table of Contents
Advertisement
Installation
40
C
Clean the panels with glass cleaner and a soft cloth.
Do not use sharp or abrasive materials or a glass
scraper. The glass could be damaged.
During installation, make sure that the lettering "right
above" is upside down at the bottom left.
1. Insert the panel downwards at an angle (Fig. A).
2. Push on the brackets on the right and left, align
them and screw in place (Fig. B).
A A
3. Insert the uppermost panel diagonally towards the
back. The smooth surface must face outwards.
4. Replace the cover and screw in place.
5. Attach the oven door.
Do not use the oven again until the panels have
been correctly fitted.
B
Advertisement
Table of Contents
