Using Multiple Handsets; Registering Handsets; De-Registering Handsets - Siemens Gigaset E500 User Manual

Using multiple
handsets

Registering handsets

You can register up to four handsets
on the base.
Registering a Gigaset handset
manually on the Gigaset E500
You must register the handset man-
ually on both the handset (1) and
the base (2).
After it has registered, the handset
returns to idle status. The internal
number of the handset appears in
the display, e.g., INT 1.
The registration process is cancelled
after 60 seconds. If the handset has
not registered within this time,
repeat the process.
1) On the handset
¤ q Settings ¤
§Menu§
¤ q Registering ¤
¤ q Register Handset ¤
¤ Enter the base system PIN
(default setting: 0000) ¤
2) On the base
¤ Within 60 seconds, press and
hold the registration/paging key
on the base (¢ page 2) for
approx. 3 seconds.
§OK§
§OK§
§OK§
§OK§

Using multiple handsets

Registering other handsets
You can register other Gigaset hand-
sets and handsets for other devices
with GAP functionality as follows.
1) On the handset
¤ Start to register the handset as
described in its user guide.
2) On the base
¤ Press and hold the registration/
paging key on the base
(¢ page 2) for
approx. 3 seconds.

De-registering handsets

You can de-register all other regis-
tered handsets from each of the reg-
istered Gigaset E500H handsets.
¤ q Settings ¤
§Menu§
¤ q Registering ¤
¤ q De-register Handset ¤
q
Select the internal
party(ies) you wish to de-
register and press
(The handset you are cur-
rently using is indicated
by <.)
~
Enter the current system
PIN and press
§Yes§
Press the display key.
§OK§
§OK§
§OK§
§OK§
.
§OK§
.
41