Restoring The Handset Default Settings; Base Settings; Activating/Deactivating Music On Hold; Activating Repeater Support - Siemens Gigaset E500 User Manual

Base settings

Activating/deactivating battery
low beep
¤ q Settings ¤
§§Menu§
¤ q Audio/Visual Signals ¤
¤ q Battery Low
¤
§OK§
(³= on)
Restoring the handset
default settings
You can reset any individual settings
and changes that you have made.
This will not affect entries in the
directory, call list, date and time or
the handset's registration to the
base.
¤ q Settings ¤
§Menu§
¤ q System ¤
¤ q Reset Handset ¤
Cancel the reset with a.
46
§OK§
§OK§
§OK§
§OK§
§OK§
Base settings
The base settings are made using a
registered handset.
Activating/deactivating
music on hold
¤ q Settings ¤
§Menu§
¤ q Telephony ¤
¤ q Music on Hold
¤
§OK§
(³= on)
Activating repeater
support
You can increase the range and sig-
nal strength of the base using a
repeater. You will need to activate
repeater mode. This will terminate
any calls being made via the base at
the time.
Prerequisite: A repeater is regis-
tered.
¤ q Settings ¤
§Menu§
¤ q System ¤
¤ q Repeater Mode
¤
§OK§
(³= activated)
Please note
u Eco Mode / Eco Mode+
(¢ page 39) and repeater sup-
port cancel each other out i.e.,
if you use a repeater, you can-
not use Eco Mode or Eco
Mode+.
u The default encrypted trans-
mission setting is deactivated
when repeater mode is acti-
vated.
§OK§
§OK§
§OK§
§OK§