Changing Ringers - Siemens Gigaset E500 User Manual

Handset settings
Setting the volume during a call:
ç
Press up (louder) or down
(quieter) on the side keys
(¢ page 2).
The setting is saved auto-
matically after 3 seconds.

Changing ringers

u Volume:
Five volume levels (1–5; e.g.,
volume 3 = ˆ) and "Off" (vol-
‡).
°
ume 0 =
u Melody:
List of pre-loaded ringer melo-
dies. The first three melodies are
the "classic" ringtones.
You can also set different ringer mel-
odies for the following functions:
u External Calls
u Internal Calls
u Alarm Clock
Setting the ringer volume
The ringer volume is the same for all
types of ring.
¤ q Settings ¤
§Menu§
¤ q Audio/Visual Signals ¤
¤ q Ringer Volume ¤
¤ q (Set the volume) ¤
Setting the volume while the
ringer is ringing:
ç
Press up (louder) or down
(quieter) on the side key
(¢ page 2).
The setting is saved auto-
matically after 3 seconds.
44
§OK§
§OK§
§OK§
§OK§
Setting the ringer melody
Set different ringer melodies for
external calls, internal calls and the
alarm clock.
For external calls you can also spec-
ify that your phone should not ring
at certain times or if a call is from an
unknown caller.
For internal calls and the alarm
clock
¤ q Settings ¤
§§Menu§
¤ q Audio/Visual Signals ¤
¤ q Ringtones ¤
¤ q Internal Calls /
Alarm Clock ¤
§OK§
¤ q (Select melody)
¤
§OK§
(³= selected)
For external calls:
¤ q Settings ¤
§§Menu§
¤ q Audio/Visual Signals ¤
¤ q Ringtones ¤
¤ q External Calls ¤
q can be used for the following:
Melody ¤
§OK§
You can set the ringer melody as
described above.
Time Control ¤
§OK§
You can specify a time period
when you do not want the tele-
phone to signal external calls e.g.,
during the night.
Switch q Activation on or off
§OK§
by pressing
q Settings ¤
Starting Time: /Ending Time:
Enter each time as a 4-digit
number and press
§OK§
§OK§
§OK§
§OK§
§OK§
§OK§
§OK§
(³= activated).
§OK§
§OK§
.