Using The Handset As An Alarm Clock; Redial Menu - Siemens Gigaset E500 User Manual

Using the handset as an alarm clock

Please note
u When using Eco Mode+ you
can ensure that the range of
the base is sufficient by press-
ing the talk key c. You hear
the ring tone if the base can be
reached.
u When Eco Mode+ is enabled:
– Call setup is delayed by
approx. 2 seconds.
– Handset standby time is
reduced by approx. 50%.
u Registering handsets that do
not support Eco Mode+
causes the mode to be deacti-
vated on the base and all other
handsets.
u Activating Eco Mode reduces
the range of the base.
u Eco Mode / Eco Mode+ and
repeater support (¢ page 46)
cancel each other out i.e., if you
use a repeater you cannot use
Eco Mode or Eco Mode+.
40
Using the handset as an
alarm clock
Activating/deactivating the alarm
clock
Requirement:
The time is set (¢ page 17).
¤ q Alarm clock ¤
§Menu§
¤ q Activation ¤
After you activate the alarm clock,
the menu for setting the wakeup
time opens automatically.
Setting the wakeup time
¤ q Alarm clock ¤
§Menu§
¤ q Wake-up Time ¤
¤ Enter wakeup time ¤
If the alarm clock is activated, you
will see the Ñ icon in the display and
the wakeup time after it.
Ð
10:47
Ñ
07:30
Redial Menu
When the alarm clock rings...
Press the display key
to deactivate the alarm clock for
24 hours.
If you do not press any key, the alarm
clock switches off after one minute.
§OK§
§OK§
(³= on)
§OK§
§OK§
§OK§
U
§Off§
or any key