Using Multiple Handsets; Registering Handsets; De-Registering Handsets; Locating A Handset ("Paging") - Siemens Gigaset S800 User Manual

Table of Contents

Advertisement

Using multiple handsets

Registering handsets

You can register up to six handsets to your
base.
A Gigaset S800H handset can be registered
on up to four bases.
Manually registering a
Gigaset S800H to a Gigaset S800/
S800A
You must activate manual registration of the
handset on both the handset (1) and the
base (2).
When the registration process has com-
pleted successfully, the handset returns to
idle status. The handset's internal number is
shown in the display e.g., INT 1. If not, repeat
the procedure. .
1) On the handset
The handset is not registered to a base.
§Register§
Press the display key.
The handset is already registered to a base:
Ï
¢
¢
v
Registration
¢
Register Handset
If the handset is already registered to four
bases:
s
Select base, e.g., Base 3 and
§OK§
press
~
If required, enter the system
PIN for the base and press
A message appears stating that the hand-
set is searching for a base that is ready for
registration.
2) On the base
Within 60 seconds press and hold the reg-
istration/paging key on the base
¢
(
page 5) (approx. 3 seconds).
.
§OK§
Registering other handsets
You can register other Gigaset handsets and
handsets for other devices with GAP func-
tionality as follows. .
1) On the handset
Start to register the handset as described
in its user guide.
2) On the base
Press and hold the registration/paging key
on the base (

De-registering handsets

You can de-register any other registered
handset from any registered Gigaset S800H
handset.
Ï
¢
¢
v
¢
De-reg. Handset
s
Select the internal subscriber
you wish to de-register and
press
(The handset you are currently
using is highlighted with <).
~
Enter the current system PIN
and press
§Yes§
Press the display key.

Locating a handset ("Paging")

You can locate your handset using the base.
¤
Briefly press the registration/paging key
on the base (
¤
.
All handsets will ring simultaneously
("paging"), even if the ringtones are deac-
tivated.
Ending paging
¤
Briefly press the registration/paging key
on the base or press the talk key c on
the handset.
Using multiple handsets
¢
page 5) (approx. 3 sec.).
Registration
§OK§
.
§Save§
.
¢
page 5).
61

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gigaset s800a

Table of Contents