Direct Dialling Keys To - Siemens Gigaset E500 User Manual

Managing directory entries
Select an entry.
Editing entries
¤ q Edit Entry ¤
§Menu§
¤ ~ (Change number if required)
¤ ~ (Change name if
¤
§OK§
required) ¤
§OK§
Using other functions
The following functions can be
§Menu§
selected with
Show Number
Show number.
Use Number
Edit or add to a stored number.
Then dial or select other functions
§Menu§
with .
Delete Entry
Delete selected entry.
Send Entry
Send a single entry to another
handset (¢ page 31).
Delete List
Delete all directory entries.
Send List
Send the complete list to another
handset (¢ page 31).
Sending the directory to
another handset
You can transfer directory entries
from other handsets to your new
handset – even entries from old
handsets.
Using the directory, direct dialling keys and lists
§OK§
¤ q:
Prerequisites:
u The sending and receiving hand-
sets must both be registered to
the same base.
u The other handset and the base
can send and receive directory
entries.
s ¤ q (Select entry) ¤
¤ q Send Entry / Send List ¤
¤ q (select the internal number
of the receiving handset) ¤
A successful transfer is confirmed by
a message and confirmation tone
on the receiving handset.
Adding a displayed number to
the directory
You can copy numbers displayed in
a list, e.g., the call list or redial list, to
the directory.
A number is displayed.
¤ Copy to Directory ¤
§Menu§
¤ Complete the entry (¢ page 30).
Direct dialling keys
; >
to
You can save important phone num-
bers that you call often to the four
direct dialling keys. You can assign
an external phone number or the
internal call function (¢ page 33) to
each direct dialling key.
To dial these saved numbers, press
the relevant direct dialling key ; to
>.
§Menu§
§OK§
§OK§
§OK§
31