Locating A Handset ("Paging"); Changing The Name Of A Handset; Listening In To An External Call - Siemens Gigaset E500 User Manual

Using multiple handsets
Locating a handset
("Paging")
You can locate your handset using
the base.
¤ Briefly press the registration/
paging key on the base
(¢ page 2).
¤ All handsets will ring at the same
time ("paging"), even if the ring-
ers are switched off.
Ending paging
Briefly press the registration/pag-
ing key on the base (¢ page 2) or
press the talk key c or display key
§Off§
on the handset.
Changing the name of a
handset
The names "INT 1", "INT 2" etc. are
assigned automatically on registra-
tion. You can change these names.
The name must be no more than 6
characters. The changed name is
displayed in every handset's list.
Prerequisite: One of the direct dial-
ling keys must be programmed for
making an internal call to a
selected number (¢ page 32).
With the handset in idle status, press
the direct dialling key (; to >) that
is programmed for making an inter-
nal call to a selected number. The
list of handsets opens. Your own
handset is indicated by <.
q
Select handset.
¤ ~ (Enter name) ¤
§Name§
42
Listening in to an
external call
You want to listen in to an existing
external call.
Prerequisite: The Listening In func-
tion must be activated.
Activating/deactivating the
function:
§Menu§
¤ q Telephony ¤
¤ q Listening In ¤
Listening in to the call:
Press the talk key con the handset.
All participants hear a signal tone.
Conf. Call is shown on the handset
display.
Ending listening in:
Press the end call key a on the
handset; all participants hear a
signal tone.
If the first internal participant
presses the end call key a, the
handset that has "listened in"
remains connected to the external
participant.
§OK§
¤ q Settings ¤
§OK§
§OK§
§OK§
(³= on)