Third Step: Connecting The Base; Connecting The Charger (If Included) - Siemens Gigaset E500 User Manual

First steps

Third step: connecting the base

¤ First, connect the tel-
ephone jack
insert the cables into
the cable ducts.
¤ Then connect the
power adapter 1.
u The power adapter must always be connected, as the phone
will not operate without a mains connection.
u Use only the power adapter and phone cord supplied. Pin con-
nections on telephone cables can vary (pin connections
¢ page 56).

Connecting the charger (if included)

2
To disconnect the plug from the charger,
press the release button
nect the plug 4.
12
and
2
Warning
1
1
¤ Connect the flat plug on the
power adapter 1.
¤ Plug the power adapter into
the plug socket 2.
and discon-
3
2
4
3