Advisory/Warning Tones - Siemens Gigaset E500 User Manual

Anon. Calls Silent ¤
You can set your handset so that it
doesn't ring for calls where
Calling Line Identification has
been withheld (not answering
machine). The call will only be sig-
nalled on the display.
Switch the Anon. Calls Silent
function on or off by pressing
(³= activated).
Activating/deactivating the
ringer
You can:
u Permanently deactivate the
ringer in idle status or when
receiving a call
u Deactivate the ringer for the cur-
rent call only.
The ringer cannot be re-activated
while a call is in progress.
Deactivating the ringer
permanently
P
Press and hold the star
key.
The Ú icon appears in the display.
Reactivating the ringer
P
Press and hold the star
key.
Deactivating the ringer for the
current call
§Silence§
Press the display key.
§OK§
§OK§

Advisory/warning tones

Your handset uses advisory tones to
tell you about different activities
and statuses. The following tones
can be activated and deactivated
independently of each other:
u Advisory Tones
– Key click: Every key press is
confirmed.
– Confirmation tone (rising tone
sequence): At the end of an
entry/setting, when the hand-
set is placed in the base and on
arrival of a new entry in the call
list.
– Error tone (descending tone
sequence): When you make an
incorrect entry.
– Menu end tone: When scroll-
ing at the end of a menu.
u Battery Low
The battery requires charging.
You cannot deactivate the confirma-
tion tone for placing the handset in
the base.
Activating/deactivating
advisory tones
¤ q Settings ¤
§§Menu§
¤ q Audio/Visual Signals ¤
¤ q Advisory Tones
¤
§OK§
(³= on)
Handset settings
§OK§
§OK§
45