Table of Contents
Advertisement
Connecting the base station
¤
First connect the power supply unit
and then the phone jack as shown
below and place the cables in the cable
recesses.
1
1
1
1
1 Underside of the base station (section), the
charger is not illustrated
2 Power supply unit 230 V
3 Phone jack with phone cord
Please note:
u
The power supply unit must always be
plugged in because the telephone
does not work without a mains connec-
tion.
u
If you buy a phone cable from a retailer,
pay attention to the wiring of the
phone jack.
Correct phone jack
3
2
1
2
3
1 unused
4
2 unused
5
3 a
6
4 b
5 unused
6 unused
Setting up the telephone for use
Your phone is now ready to use!
You can now use the handsfree unit to
make a phone call directly on the base sta-
tion.
The answering machine is switched on
with a standard announcement.
The base station is assigned the internal
number 0 and the internal name
Note:
You can make individual settings on the base
station (e.g. date and time).
Setting up the handset for use
Inserting the battery
Caution:
Use only the rechargeable batteries recom-
mended by Siemens on page 64! Never use
a conventional battery (non-rechargeable)
or other battery types as this may cause signif-
icant damage to health and property.
For example, the jacket of the battery could
be destroyed or the battery could explode.
The phone could also malfunction or be dam-
aged as a result of using batteries that are
not of the recommended type.
¤
Insert the batteries the right way round
(see figure).
The polarity is indicated in or on the bat-
tery compartment.
INT
0.
7
Hide quick links:
Advertisement
Table of Contents
