Installing The Power Supply - TYAN TOMCAT N3400B Manual

Onboard LAN LED Color Definition
The three onboard Ethernet ports have green and yellow LEDs to indicate LAN
status. The chart below illustrates the different LED states.
10/100/1000 Mbps LAN Link/Activity LED Scheme
10 Mbps
Active
100 Mbps
Active
1000 Mbps
Active
No Link

2.14 - Installing the Power Supply

There are two power connectors on your Tomcat n3400B S2925-E. The Tomcat
n3400B S2925-E requires that you have an EPS12V power supply that has a 24-pin
and an 8-pin power connector.
EPS12V (24-pin, PW1)
Applying power to the board
1. Connect the EPS 12V 8-pin power connector.
2. Connect the EPS 12V 24-pin power connector.
3. Connect power cable to power supply and power outlet
YOU MUST unplug the power supply before plugging the power cables
NOTE
to motherboard connectors.
Left LED
Link Green
Blinking Green
Link Green
Blinking Green
Link Green
Blinking Green
EPS12V (8-pin, PW2)
http://www.tyan.com
Off
33
Right LED
Off
Off
Green
Green
Yellow
Yellow
Off