3.7.2 IDE Configuration Sub-Menu
You can use this screen to select options for the IDE Configuration Settings.
Use the up and down <Arrow> keys to select an item. Use the <Plus> and <Minus>
keys to change the value of the selected option.
Main
IDE Configuration
Onboard IDE Controller
Serial-ATA Devices
nVidia RAID Setup
Primary IDE Master
Primary IDE Slave
SATA0 (Dev5, Func0)
SATA1 (Dev5, Func0)
SATA2 (Dev5, Func1)
SATA3 (Dev5, Func1)
SATA4 (Dev5, Func2)
SATA5 (Dev5, Func2)
Hard Disk Write Protect
IDE Detect Time Out (Sec)
Feature
IDE Configuration
Onboard IDE Controller
Serial-ATA Devices
Hard Disk Write Protect
IDE Detect Time Out
(Sec)
BIOS Setup Utility
Advanced
PCI/PnP
Option
Enabled
Disabled
Device 0/1/2
Disabled
Device 0
Device 1/1
Disabled
Enabled
0~35
(at 5 interval)
http://www.tyan.com
Boot
Security
[Enabled]
[Device 0/1/2]
[Disabled]
[35]
Description
Enable/Disable onboard IDE controller.
Configure serial ATA devices.
Enable/Disable device write protection.
This will be effective only if device is
accessed through BIOS.
Select the time out value for detecting
ATA/ATAPI device(s).
43
Chipset
Exit
While entering setup,
BIOS auto detects the
presence of IDE
devices. This displays
the status of auto
detection of IDE
devices.
← → Select Screen
↑↓ Select Item
+/-
Change Option
F1
General Help
F10 Save and Exit
ESC Exit