Table of Contents
Advertisement
Chapter 3: BIOS Setup
3.1 About the BIOS
The BIOS is the basic input/output system, the firmware on the motherboard that
enables your hardware to interface with your software. The BIOS determines what a
computer can do without accessing programs from a disk. The BIOS contains all the
code required to control the keyboard, display screen, disk drives, serial
communications, and a number of miscellaneous functions. This chapter describes
the various BIOS settings that can be used to configure your system.
The BIOS section of this manual is subject to change without notice and is provided
for reference purposes only. The settings and configurations of the BIOS are current
at the time of print and are subject to change, and therefore may not match exactly
what is displayed on screen.
This section describes the BIOS setup program. The setup program lets you modify
basic configuration settings. The settings are then stored in a dedicated, battery-
backed memory (called NVRAM) that retains the information even when the power
is turned off.
To start the BIOS setup utility:
1. Turn on or reboot your system.
2. Press <Del> during POST (<F4> on remote console) to start the BIOS setup
utility.
3.2 – BIOS Menu Bar
The menu bar at the top of the windows lists these selections:
Main
Advanced
PCI/PnP
Boot
Security
Chipset
Exit
To configure basic system setups
To configure the advanced chipset features
To configure legacy Plug & Play or PCI settings
To configure system boot order
To configure user and supervisor passwords
To configure chipset management features
To exit setup utility
35
http://www.tyan.com
Hide quick links:
Advertisement
Table of Contents
