Setup Basics; Getting Help; In Case Of Problems - TYAN TOMCAT N3400B Manual

3.3 Setup Basics

The table below shows how to navigate in the setup program using the keyboard.
Key
<F1>
<ESC>
  arrow keys
 or  arrow keys
<Tab> or <Shift-Tab>
<Home> or <End>
<PgUp> or <PgDn>
<->
<+>
<F8>
<F9>
<F10>
<Enter>

3.4 Getting Help

Pressing [F1] will display a small help window that describes the appropriate
keys to use and the possible selections for the highlighted item. To exit the Help
Window, press [ESC].

3.5 In Case of Problems

If you have trouble booting your computer after making and saving the changes with
the BIOS setup program, you can restart the computer by holding the power button
down until the computer shuts off (usually within 4 seconds); resetting by pressing
CTRL-ALT-DEL; or clearing the CMOS.
The best advice is to only alter settings that you thoroughly understand. In particular,
do not change settings in the Chipset section unless you are absolutely sure of what
you are doing. The Chipset defaults have been carefully chosen either by TYAN®®
or your system manufacturer for best performance and reliability. Even a seemingly
small change to the Chipset setup options may cause the system to become
unstable or unusable.
NOTE
: The following pages provide the details of BIOS menu. Please be
noticed that the BIOS menu are continually changing due to the BIOS
updating. The BIOS menu provided are the most updated when this manual is
written. Please visit TYAN
information of BIOS updating.
General help window
Exit current menu
Select a different menu
Move cursor up/down
Cycle cursor up/down
Move cursor to top/bottom of the window
Move cursor to next/previous page
Select the previous value/setting of the field
Select the next value/setting of the field
Load Fail Safe default configuration values of the menu
Load the Optimal default configuration values of the
menu
Save and exit
Execute command or select submenu
®
website at http://www.TYAN.com
36
http://www.tyan.com
Function
for the