Installing Add-In Cards - TYAN TOMCAT N3400B Manual

2.12 - Installing Add-In Cards

Before installing add-in cards, it's helpful to know if they are fully compatible with
your motherboard. For this reason, we've provided the diagrams below, showing
the most common slots that may appear on your motherboard. Not all of the
slots shown will necessarily appear on your motherboard.
PCI Express x16 slot (black)
PCI Express x1 slot (black)
PCI slot (white)
Simply find the appropriate slot for your add-in card and insert the card firmly.
Do not force any add-in cards into any slots if they do not seat in place. It is
better to try another slot or return the faulty card rather than damaging both the
motherboard and the add-in card.
PCI IDESELs and IRQ Assignments
Slot or Device
PCI Slot #1
(32bit)
PCI Slot #2
(32bit)
PCI Slot #3
(32bit)
Onboard
IEEE1394a
Onboard
VGA
NOTE
IDSEL# Bus#
AD23 PCI
Bus
AD24 PCI
Bus
AD25 PCI
Bus
AD22 PCI
Bus
AD26 PCI
Bus
YOU MUST ALWAYS unplug the power connector from the
motherboard before performing system hardware changes.
Otherwise you may damage the board and/or expansion
device.
http://www.tyan.com
PIRQ PIRQ
INT_A INT_B
INT_D INT_A
INT_C INT_D
INT_C
INT_D
31
PIRQ PIRQ
INT_C INT_D
INT_B INT_C
INT_A INT_B