TYAN TOMCAT N3400B Manual page 30

Attaching Floppy Drive Cables
Attaching floppy diskette drives are done in a similar manner to hard drives. See
the picture below for an example of a floppy cable. Most of the current floppy
drives on the market require that the cable be installed with the colored stripe
positioned next to the power connector. In most cases, there will be a key pin on
the cable which will force a proper connection of the cable.
1.SATA drive cable
connection
2. SATA drive power
connection
3. SATA cable motherboard
4. SATA drive power adapter
30
http://www.tyan.com
connector
Attach first floppy drive
(drive A:) to the end of
the cable with the twist
in it. Drive B: is usually
connected to the next
possible connector on
the cable (the second or
third connector after you
install Drive A:).