TYAN TOMCAT N3400B Manual page 72

3.11.1.1 Memory Configuration Sub-Menu
This menu has options for memory speed & latency. Use the up and down arrow
(/) keys to select an item. Use the Plus and Minus (+/-) keys to change the
value of the selected option.
Main
Memory Configuration
Bank Interleaving
Enable Clock to All DIMMs
MemClk Tristate C3/ATLVID
Memory Hole Remapping
DCT Unganged Mode
Power Down Enable
Power Down Mode
Feature
Memory Configuration
Bank Interleaving
Enable Clock to All DIMMs
MemClk Tristate
C3/ATLVID
Memory Hole Remapping
DCT Unganged Mode
Power Down Enable
Power Down Mode
BIOS Setup Utility
Advanced PCI/PnP
Disabled
Disabled
Disabled
Enabled
Disabled
Enabled
Disabled
Channel
Chip Select
http://www.tyan.com
Boot Security
[Auto]
[Disabled]
[Disabled]
[Enabled]
[Always]
[Enabled]
[Channel]
Option
Enable Bank Memory Interleaving
Auto
Enable unused clocks to DIMMs
Even Memory slots are not
Enabled populated.
Enable/Disable MemClk Tri-Stating
during C3 and Alt VID
Enabled
Enable Memory Remapping around
Memory Hole
Enabled
Always: Configured to two single-
Always
channel DRAM controllers
Auto: Configured to a single dual-
Auto
channel DRAM Controller
Enable or disable DDR power down
mode
Set DDR power down mode
72
Chipset Exit
MEMCLK can be set by
the code using AUTO, or
if you use LIMIT, you can
set one of the standard
values.
← → Select Screen
↑↓ Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Description