Installing The Power Supply - TYAN S2932-E Manual

2.10 - Installing the Power Supply

There are three power connectors on your Thunder n3600M S2932-E. The
Thunder n3600M S2932-E requires that you have an EPS12V power supply
that has a 24-pin, an 8-pin and a 4-pin power connectors.
NOTE: Please be aware that ATX 2.x, ATX12V and ATXGES power supplies
may not be compatible with the board and can damage the motherboard and/or
CPU(s).
24- Pin EPS/12V Powe r Conn ec tor
8-Pin 12V Power Connector
4-P in 12V Power Connector
J28: PW1
12 +3.3V
11 +12V2
10 +12V2
9 +5VSB
8 PWR OK
7 GND
6 +5V
5 GND
4 +5V
3 GND
2 +3.3V
1 +3.3V
Applying power to the board
1. Connect the 12V 8-pin power connector.
2. Connect the EPS/12V 24-pin power connector.
3. Connect the 4-pin power connector.
4. Connect power cable to power supply and power outlet
YOU MUST unplug the power supply before plugging the power cables
NOTE
to motherboard connectors.
24 GND
23 +5V
22 +5V
21 +5V
20 RESVD
19 GND
18 GND
17 GND
16 PSON#
15 GND
14 -12V
13 +3.3V
J49: PW2
4 GND 8
3 GND 7
2 GND 6
1 GND 5
J27: PW3
4 +12V
3 +12V
2 GND
1 GND
34
+12V3
+12V3
+12V3
+12V3