Changing The Name Of The Base Station; Repeater Support; Restoring The Base Station To Factory Settings - Siemens Gigaset SL100 Instructions Manual

Changing the name of the base station

The names "Base station 1" to "Base station 4" are assigned automatically. You can
change the name of your base station.
¢ ¢
v
Settings
[RRRRRRRRRRRRRRRRRRRRR]
Edit
~
[RRRRRRRRRRRRRRRRRRRRR]
Save
The name of the base station is handset specific, i.e. the base station
i
receives the name assigned to it from the corresponding handset. The
same base station can have different names on different handsets.

Repeater support

With a repeater you can increase the range and reception strength of your base station;
the repeater has to be registered. To use the repeater you first have to activate the
repeater mode. This will cancel any calls that are in progress.
¢
v
Base Settings
s
Repeater Mode
[RRRRRRRRRRRRRRRRRRRRR]
Yes

Restoring the base station to factory settings

Resetting does not affect the system PIN and handsets are still registered.
¢
v
Base Settings
~
OK
[RRRRRRRRRRRRRRRRRRRRR]
Yes
Select Base
Select the base station and press the display key.
Enter a new name (up to 16 characters) (for text
input see page 82).
Now press the display key to confirm the setting.
¢
Add. Features
Select the menu item and confirm.
OK
Press the display key to confirm the prompt.
¢
Base Reset
Enter the system PIN (factory setting: 0000) and con-
firm.
Press the display key to confirm the prompt.
Setting the base station
74