Siemens Gigaset SL100 Instructions Manual page 62

Hide thumbs Also See for Gigaset SL100:
Table of Contents

Advertisement

Using several handsets
The handset should be between 1 and 2 metres away from the baby. The microphone
must be directed towards the baby.
When the room monitor is activated, incoming calls to the handset which is near the
baby are indicated without a ring tone, they are just shown on the display. The display
and the key pad are not illuminated.
When entering an external telephone number, make sure:
The handset in the baby's room is not barred for outgoing calls.
The number to which the alarm calls is sent is not blocked by an activated answering
machine.
W
Always check the settings of the room monitor before you leave
home, e.g. sensitivity and phone line.
i
Activating the room monitor function and entering the "call to" number for
the first time
v
s
Add. Features
Room Monitor
r
s
R[RRRRRRRRRRRRRRRRRRR]
Edit
either ...
[RRRRRRRRRRRRRRRRRRRRR]
INT
s
OK
or ...
~
à
Save Entry
61
If you redirect your room monitor to an external number, then you
should tell that number's owner.
The room monitor's call to an external phone number stops after
about 90 seconds, to an internal number (handset) it stops after
about 180 seconds (depending on the base station).
The room monitor function severely curtails the handset's operating
time. You can leave the handset in the baby's room in the charging
unit. This will avoid the battery going flat.
The room monitor function can also be used in Walk and Talk mode.
Step 1: Open the entry field for the room monitor:
Open the menu.
Select the menu item and confirm.
OK
Confirm. The input field is opened.
OK
Step 2: Activate the room monitor:
In the line Room M.: select On.
Step 3: Enter the telephone number:
Scroll to the Call to: line and press the display key.
The input field for the telephone number is opened.
Enter an internal number as the "call to" number:
Press the display key.
Select the handset and confirm.
Enter an external number as the "call to" number:
Enter the telephone number.
Press the display key.
Confirm. The entry is stored.
OK

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents