Attaching The Belt Clip; Activating/Deactivating The Handset - Siemens Gigaset SL100 Instructions Manual

Preparing to use your phone
i
To register additional handsets, refer to page 56.
For the initial charge we recommend a continuous, uninterrupted charg-
W
ing period of five hours, whatever charge status is indicated. After a while
the charge capacity of the battery will decrease for technical reasons.
The battery charging status is correctly displayed only after uninterrupted charging/
discharging. You should therefore avoid removing the battery unnecessarily and end-
ing the charging process prematurely.
Once initial charging is complete, you can replace your handset in the
◆
charging shell after each call. Charging is controlled electronically.
i This ensures that the battery is charged in a way that maximises its
life.
The battery heats up during charging. This is normal and not
◆
dangerous.
Note
Your telephone is now ready for use. To correctly record the time of calls you have to
now set the date and time (page 14).

Attaching the belt clip

Push the belt clip onto the back of the handset until the lugs click into the recesses on
either side of the handset.

Activating/deactivating the handset

To activate hold down the end call key a. You will hear a confirmation tone.
i
A deactivated handset activates automatically when placed in the
charger.
9